Konsberg AIS 200, Installation Manual

Page: 46 / 119

Kongsberg AIS 200 Installation Manual, rev. 2 Software setup procedure
5.2.1 Security settings AIS 200
- Settings ----------
Nav.Status
Voyage related
Gyro calibration
Static data
VHF
▲
LR
Serial
PIN
Security PIN code
All entries on this page are protected by a PIN code.
Initially, a default authorisation code is used for altering
data fields in the
Settings page. The default PIN code is:
1234 . We recommend to change to a vessel specific PIN
code.
Enter new four digit PIN code by selecting PIN and PIN:
**** on the
Settings menu.
Note!
If the PIN code is lost, contact Customer Support
for help to retrieve the correct PIN code .
5.2.2 Entering static data
- Static data -------
Name: VANNINA
Call: CA122
MMSI: 136547932
IMO: 3334445
Keel: 30.5
DimA: 0
DimB: 0
DimC: 0
DimD: 0
LocDimA: 0
LocDimB: 0
LocDimC: 0
LocDimD: 0
Static data are specific ship data that do not change from
one voyage to another. In order to input static data, select
parameters by pressing
EDIT
and press
SHIFT
to access
text mode.
If MMSI number is changed, the unit should be restarted,
see the
Kongsberg AIS 200 User Manual [1].
Name: The vessel name (text).
Call: The vessel call sign (text).
MMSI: The Maritime Mobile Signal Identifier number.
IMO: The vessel IMO number.
Keel: Height over keel. Total height of vessel in
metres.
External DimA: GPS antenna location
)
)
DimB: External GPS antenna location
DimC: External GPS antenna location *
DimD: External GPS antenna location *)
LocDimA: Internal GPS antenna location
LocDimB: Internal GPS antenna location
LocDimC: Internal GPS antenna location *
LocDimD: Internal GPS antenna location *)
*) Dimensions C and D can be set to max. 63 metres.
36