Konsberg AIS 200, Installation Manual

Page: 53 / 119

Kongsberg AIS 200 Installation Manual, rev. 2 Software setup procedure
!AIVDM,1,1,,A,?3nUCr000000D00,2
!AIVDO,1,1,,B,40000wh0000000g`68TCD3o00`MC,0
!AIVDM,1,1,,A,13n31pOP00PgWwlTCDRh0?wR05@L,0
!AIVDM,1,1,,B,402MBmAu?0b7j0gWwLTCD;A005@L,0
!AIVDM,1,1,,B,13nUCr?0m`Pg1@<TD2tStS7T0<0:,0
!AIVDM,1,1,,B,?02MBm@0WDeDD00,2
!AIVDM,2,1,5,B,A02MBm@669:F80@`6A=v9h1mt6TcP03s`RF001;F;`00hap9P00?dSN000uB,0
Data can be decoded/replayed and verified using an external system that is capable of reading
this kind of data and has necessary software for this functionality.
There are two types of alarm messages, which can be output on the PI serial or LAN port. An
ALR-message, e.g. $AIALR, is output when an error situation arises. A TXT message, e.g.
$AITXT, is output when there is an indicator message. An error situation may arise if there is
a TX malfunction, while an indicator message may arise when differential corrections are
lost. The ALM LED in the front of the AIS 200 will be lit if an error situation arises.
43