Konsberg AIS 200, Installation Manual

Page: 117 / 119

Kongsberg AIS 200 Installation Manual, rev. 2 Appendix F - Inland Waterway installation
!***** Voyage data, updated from PI sentence PIWWVSD or MKD *****
AIS_IWWVSD_REPORTING_RATE
0 !Reporting Rate, 0=N/A,
1=SOLAS, 2=Inland
IS_IWWVSD_BLUE_SIGN 0 !Blue Sign, 0=N/A (default)
AIS_IWWVSD_HAZARDOUS_CARGO 5 !Hazardous Cargo, 5=Unknown (default),
!0-3=Number of Blue Cones,
!4=B-Flag
S_IWWVSD_LOADED 0 !Ship loaded, 1=Loaded
!2=Unloaded, 0=N/A (default)
AIS_IWWVSD_DRAUGHT 0.00 !Static draught (1/100 meter, 0=Unknown)
AIS_IWWVSD_AIR_DRAUGHT 0.00 !Air draught (1/100 meter, 0=Unknown)
AIS_IWWVSD_NUM_TUGBOATS 7 !Number of tugboats, 7=Unknown,
!0-6=tugboats
AIS_ _O 255 !Number of Crew
!255=N/A
AIS_ NUM_O 8191 !Number of Pass
!8191=N/A
AIS_IWWVSD_NUM_OF_SUPP_PERSONNEL 255 !Number of Supp
!255=N/A
!***** Inland Area, updated from VDL message23 *****
IS_IWWA_VALID 0 !Area Data Valid, 0=No, 1=Yes
IS_IWWA_LON_NE_DEG 0 !North East Corner
ON_NE_SEC 0
IS_IWWA_LAT_NE_DEG 0 !North East Corner
IS_IWWA_LON_SW_DEG 0 !South West Corner
0
0
!South West Corner
IS_IWWA_LAT_SW_MIN 0
AIS_IWW
!6=Inland Waterway Mobile
IS_IWWA_TYPE_OF_SHIP 0 !Type of Ship, 0=All, 1-99
14 qu
The Inland Waterway configuration can be requested via the following queries. The response
is only sent to the presentation or pilot port requesting the information, except for request on
the port LAN where the response is sent to the UDP port also.
To request the current inland static ship settings from the AIS Mobile Unit, use the command:
$PSTXQ,PIWWSSD*<FCS><CR><LF>
A
!1=No, 2=Yes, 3=Not Used
AI
IWWVSD_NUM F_CREW Members
IWWVSD_ F_PASSENGERS engers
orting Personnel
A
A
AIS_IWWA_LON_NE_MIN 0
AIS_IWWA_L
A
AIS_IWWA_LAT_NE_MIN 0
AIS_IWWA_LAT_NE_SEC 0
A
AIS_IWWA_LON_SW_MIN 0
AIS_IWWA_LON_SW_SEC
AIS_IWWA_LAT_SW_EG
A
AIS_IWWA_LAT_SW_SEC 0
A_TYPE_OF_STATION 0 !Type of Station, 0=All Mobile
A
.2 Re esting configuration