Konsberg AIS 200, Installation Manual

Page: 118 / 119

Kongsberg AIS 200 Installation Manual, rev. 2 Appendix F - Inland Waterway installation
The AIS Mobile Unit response message is the standard inland waterway static ship data
mes
as the
$PIW
rsh ngth>,<beam>,<qspeed>,<qcourse>,<qheading>
FCS
sage and h format:
WSSD,<eu ipno>,<type>,<le
*< ><CR><LF>
Field Description Range
PIWWSSD Message ID identifying this sentence NA
Max. 8 ASCII chara
1500-1999, 8000
<eurshipno> European ship number cters
<type> Numeric ERI classification ship type -8999
<length> Length of ship 0 – 800.0 metres
<beam> Beam of ship 0 – 100.0 metres
<qspeed> Quality of speed information 0: low, 1: high
<qcourse> Quality of course information 0: low, 1: high
<qheading> Quality of heading information 0: low, 1: high
To request the current inland voyage ship settings from the AIS Mobile Unit, use the
command:
$PSTXQ,PIWWVSD*<FCS><CR><LF>
The AIS Mobile Unit response message is the standard inland waterway voyage ship data
message and has the format:
$PIWWVSD,<reprate>,<bluesign>,<hazcargo>,<loaded>,<draught>,<airdraught>,
<tugboats>,<numcrew><numpass>,<numsupp>*<FCS><CR><LF>
Field Description Range
PIWWVSD Message ID identifying this sentence NA
<reprate> Reporting rate 0: N/A,
1: SOLAS
2: Inland (2 sec.)
<bluesign> Blue Sign 0: N/A,
1: Not set (No)
2: Set (Yes)
<hazcargo> Hazardous cargo
0 – 3: number of blue
cones
4: B-Flag
5: Unknown
<loaded> Loaded / Unloaded 0: N/A,
1: Loaded
2: Unloaded