Konsberg AIS 200, Installation Manual

Page: 104 / 119

Kongsberg AIS 200 Installation Manual, rev. 2 Appendix C - Software setup using optional MKD
Se hlighting the lect security level, and confirm by hig sym
eter groups.
ameters that h
bol and pressing the
ENTER
bu
Continue entering security levels for the remaining param
N
the operation of the system, all par ave to be changed
during normal operation should be set to Level 0.
Note!
Once authenticated with L1 or L2 PIN code, the authentication is valid until the
View page has been displayed for 5 seconds. To protect the AIS 200 security
systems, the MKD returns to the View page when not used for 15 minutes. In high
security applications we recommend manually returning to the View page when a
1.2 Entering static data optional MKD
All vessel data that do not ch ld be entered during
installation.
If MMSI number is changed, the unit should be restarted, see the
Kongsberg AIS 200 User
Manual for details.
tton.
ote!
To ease
change that required authentication is completed.
1
ange from one voyage to another shou
= = = = P 1
1. Press the
MENU
button to activate the
Main menu, and
= = = M a i n M e n u = = = =
4 . S t a t i c D a t a
select Static Data. The
Static Data menu will be displayed.
= = = S t a t i c D a t a = = = = = P 1 4
O w n S h i p
The following information should be entered:
1 / 3
- - - - - - - - - - - - - - - - - - - - - - - - -
N a m e : A N N E B E R I T
C a l l : T A 1 6 4 G H
M M S I : 1 2 4 3 9 5 8 5 6
I M O : 1 0 9 8 5 6 3
K e e l : 1 2
ntifier number
Vessel’s IMO number
▼
Name : Vessel name
Call : Vessel’s call signal
MMSI : The vessel’s Maritime Mobile Signal
Ide
IMO :
Keel : Vessel height over keel in metres. Total
height from keel to mast.
Use the arrow-down button to move to next page where horizontal location for
the GPS antenna included in the AIS 200 system should be entered. Refer page
27.
94