manualshive.com logo in svg

Konica Minolta FK-102, User Manual

Share
Download
Konica Minolta FK-102 User Manual Download Page 50

Setting Transmission Conditions -  (continued)

2-12

Confirming Settings and Communication Results

The settings and communication results of the FAX Basic screen and FAX Application screen
can be confirmed by using [

CHECK

] on the control panel.

1.

Press [

CHECK

] on the control panel.

2.

Press

Setting conf

.

3.

Confirm the settings.

Press

BACK

 to go back to the previous screen.

4.

Press

BACK

 twice after completion of confirmation.

The FAX Basic screen will be restored.

•

Refer to "Substitute Transmission" (p. 7-6) for information on intercepted transfer.

•

Refer to "Resending (Restored transmission)" (p. 2-25) for information on resending.

FOR DETAILS

HINTS

Summary of Contents for FK-102










































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands