manualshive.com logo in svg

Konica Minolta FK-102, User Manual

Share
Download
Konica Minolta FK-102 User Manual Download Page 161

Compulsory mem. Reception -  (continued)

7-4

Deleting a document held in memory

Perform the following procedure to delete the document received and held in memory.

1.

Press [

Fax

] on the control panel to view the Fax Basic

screen, if it is not already displayed.

2.

Press [

APPLICATION

] on the control panel.

3.

Press the File print.

4.

Press

Compulsory mem. Rx

 and then 

OK

.

The password entry window appears in the Compulsory mem.Rx file print screen
appears.

5.

Enter the password (4 digits) with the key pad.

•

To interrupt operation, press 

CANCEL

.

•

If you press [

STOP/CLEAR

], the information you have entered will be deleted.

FOR DETAILS

Summary of Contents for FK-102










































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands