Konica Minolta FK-102, User Manual

Page: 166 / 329

8-2
Polled Transmission
The Polled transmission function enables the FK-102 to scan a document and store it in memory
until a remote station sends a polling command, which causes transmission of the stored docu-
ment. Polled transmission provides two options: One option uses Memory that is exclusively des-
ignated for storing polled transmission documents; the other option uses the Bulletin board for the
same purpose. The description below assumes use of the former option, which uses exclusive
memory. To use the Bulletin board option, see "To transmit by polling a document written on a
Bulletin board" (p. 8-11).
>>> Specifications for Polled Tx <<<
•
Only one document can be transmitted by Polled transmission.
•
The Memory Tx is automatically selected.
Functions incompatible with Polled Tx
Total page set, Polling Rx, Timer Tx, Int'l com, ECM off, Confiden. Tx, ID Tx, Bulletin,
Relay Tx Req
Perform the following procedure to use Polled Tx.
1.
Press [ FAX ] on the control panel to view the FAX Basic
screen, if it is not already displayed.
2.
Press [ APPLICATION ] on the control panel.
3.
Press Polled Tx .
Polled Tx becomes reversed.
4.
Press OK .
The FAX Basic screen will be restored.
To release the setting, press CANCEL .
5.
Set other functions if necessary.
See "Setting Transmission Conditions" (p. 2-10) for setting functions on the FAX Basic
screen. See "Application functions overview" (p. 6-4) for setting functions on the FAX Appli-
cation Menu.
FOR DETAILS
HINT