manualshive.com logo in svg

Konica Minolta FK-102, User Manual

Share
Download
Konica Minolta FK-102 User Manual Download Page 151

6-40

ID Transmission

ID transmission requires that transmission be perform with a password attached. In case the
receiving facsimile with FK-102 is set to Closed area Rx, it is necessary for the sender to send
the same password as the Closed area Rx password.

>>> Specifications for ID Tx <<<

Functions incompatible with ID Tx

Polled Tx, Polling Rx, Confidential Tx, Bulletin, Relay Tx Req

1.

Press [

FAX

] on the control panel to view the FAX Basic

screen, if it is not already displayed.

2.

Press [

APPLICATION

] on the control panel.

3.

Press .

4.

Press

ID Tx

.

5.

Enter the Tx ID (4 digits for that remote station is FK-102) in
the Password box.

Summary of Contents for FK-102










































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands