Konica Minolta FK-102, User Manual

Page: 294 / 329

11-20
Bulletin Board Transmission Report
This report is printed out automatically following polling transmission of a document registered for
the bulletin board.
Automatic printout can be set to ON or OFF with [Bulletin Tx report] at [Report output set] of Key
Operator mode. For details, see "Report Output set" (p. 10-27).
REMOTE STATION: .....The following is shown.
• Remote station name when remote station name is registered in
abbreviated dialing
• Telephone number of remote station.
START:.........................The time at which communication started.
TIME: ...........................The required time for the communication is shown.
Pages:..........................The number of pages transmitted.
RESULT: ......................OK Shown when communication ended normally.
S-OK Shown when [ STOP/CLEAR ] is pressed to terminate
communication.
NG Shown when a communication error has occurred.
Busy Shown when unable to complete communication due to
the line being busy.
No ans Shown when the remote station being called did not
answer.
TEL Shown when there has been an incoming telephone call.
Cont Shown when an error has occurred and the FK-102 has
switched to error page redialing.
M-full Memory-full is shown when the FAX file memory became
full during reception and reception failed.
PW-OFF Shown when the power switch is turned off.
REMARKS: ..................BUL and Bulletin board BOX no. are shown.