Media Types
105
"
For custom sizes, use the printer driver to specify the settings within
the ranges shown in the above table.
Media Types
Before purchasing a large quantity of special media, do a trial print
with the same media and check the print quality.
Keep media on a flat, level surface in its original wrapper until it is time to
load it. For a list of approved media, refer to printer.konicaminolta.com.
Plain Paper (Recycled Paper)
Use media that is
Suitable for plain paper laser printers, such as standard or recycled office
paper.
Note
Do not use the media types listed below. These could cause poor print
quality, media misfeeds, or damage to the printer.
DO NOT use media that is
Coated with a processed surface (such as carbon paper, and colored
paper that has been treated)
Capacity
Tray 1
(Manual Feed
Tray)
Up to 100 sheets, depending on the paper
weight.
Tray 2/3/4
Up to 500 sheets, depending on the paper
weight.
Orientation Tray 1
(Manual Feed
Tray)
Face down
Tray 2/3/4
Face up
Driver
Media Type
Plain Paper (Recycled)
Weight
60–90 g/m² (16–24 lb bond)
Duplexing
See page 104 for supported sizes.
Glossy
Mode
ON/OFF
Supported
"
Glossy mode is Disabled at Grayscale (Color Mode), or
Duplex Print.
Summary of Contents for bizhub C31P
