Konica Minolta bizhub C31P User Manual Download Page 234

Page: 234 / 282

Status, Error, and Service Messages

220

Error Messages (Warning:

)

“I-UNIT” in a message refers to the print unit.

REBOOTING

The printer is being
restarted.

No action needed.

WARMING UP

The printer is warming up.

OFFLINE

The printer is offline.

To print on a
network, change
the TELNET
setting so it is
online.

This message...

means...

do this...

FUSER UNIT
END OF LIFE

The fuser unit has
reached the end of its
life.

Contact Technical Sup-
port with the error infor-
mation.

HDD
NEAR FULL

The hard disk is
nearly full.

Delete print jobs or
resources (fonts, forms,
etc.) which saved on the
hard disk.

INCORRECT
HDD

Since the hard disk
drive was formatted
with a different
machine, the hard
disk drive could not
be used.

Replace the hard disk
drive with one
compatible with this
machine, or select

HDD

FORMAT

from

SYS

DEFAULT MENU

and

format the hard disk.

INCORRECT
MEMORY CARD

Since the
CompactFlash card
was formatted with a
different machine, the
CompactFlash card
could not be used.

Replace the
CompactFlash card with
one compatible with this
machine, or select

CARD FORMAT

from

SYS DEFAULT MENU

and format the
CompactFlash card.

INCORRECT
I-UNIT

The

print unit is an

unapproved type.

Install a KONICA
MINOLTA print unit of
the appropriate type See
page 144.

This message...

means...

do this...

Summary of Contents for bizhub C31P



























































































































































































































































































Search results

Summary of Contents for bizhub C31P

Reviews:

Related manuals for bizhub C31P

Brands by name

Popular brands

Konica Minolta bizhub C31P, User Manual

Search results

Summary of Contents for bizhub C31P

Reviews:

Related manuals for bizhub C31P

Brands by name

Popular brands