Camera Direct
100
Camera Direct
If a digital camera with PictBridge (1.0 or later) is connected to the printer
through the Camera Direct Print port, images stored on the digital camera can
be printed directly from the printer.
"
For details on using the digital camera, refer to your digital cameras
manual.
"
The following features are not supported with Camera Direct.
- DPOF AUTOPRINT image print
- Cropping print
- Borderless
- Print quality (printer setup)
- Paper type (printer setup)
- DPOF cable disconnect recovery
Printing Directly from a Digital Camera
1
From the printer’s
Camera Direct
Menu, specify settings for
Paper
Source
,
Layout
,
Paper Margin
and
Image Quality
.
"
The Media Type setting that is used is the default printer setting
that is selected.
The Media Type setting cannot be selected from the digital cam-
era.
"
If these settings can be specified from the digital camera, they do
not need to be specified from the control panel. These settings are
overridden by settings configured within the digital camera.
For details on control panel settings, refer to “CAMERA DIRECT”
on page 68.
2
Connect the USB cable to the dig-
ital camera and to the KONICA
MINOLTA Digital Camera Direct
Print Port.
"
A USB cable is not
included with the printer
and must be purchased
separately, if not supplied
with your digital camera.
3
From the digital camera, specify
the image that you wish to print and the desired number of copies.
4
Start printing from the digital camera.
Summary of Contents for bizhub C31P
