Media Types
107
Thick Stock
Paper thicker than 90 g/m
2
(24 lb bond) is referred to as thick stock. Test all
thick stock to ensure acceptable performance and to ensure that the image
does not shift.
DO NOT use thick stock that is
Mixed with any other media (as this will cause printer misfeeding)
Envelopes
Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper—the front, back, and flap. Anything printed in these lay-
ered regions may be lost or faded.
Capacity
Tray 1
(Manual Feed
Tray)
Up to 20 thick stock sheets, depending on
their thickness.
Tray 2/3/4
Not supported
Orientation
Face down
Driver
Media Type
Thick 1 (91-150 g/m
2
)
Thick 2 (151-210 g/m
2
)
Weight
91–210 g/m² (25–55.9 lb bond)
Duplexing
Not supported
Glossy
Mode
ON/OFF
Supported
"
Glossy mode is Disabled at Grayscale (Color Mode), or
Duplex Print.
Capacity
Tray 1
(Manual Feed
Tray)
Up to 10 envelopes, depending on their
thickness
Tray 2/3/4
Not supported
Orientation
Face down
Driver
Media Type
Envelope
Weight
91–163 g/m² (25–43 lb bond)
Duplexing
Not supported
Glossy
Mode
Not supported
Summary of Contents for bizhub C31P
