92
484164/A
•
Installed
: This channel is connected to your echo sounder system.
•
Lost
: This channel cannot be used.
•
Available
: This channel is vacant and ready for use.
Note
When you work in the
Installation
dialog box, you must always select
Apply
to save the
changes made on a page. You must do this before you continue working on a different page.
Procedure
1
On the
Setup
menu, select
Installation
.
Observe that the
Installation
dialog box opens. This dialog box contains a number of
pages selected from the menu on the left side.
2
On the left side of the
Installation
dialog box, select
Transceiver
.
3
Install the channels(s).
a
Observe that the transceiver(s) you have connected to the computer are listed.
Each transceiver is identified with type and serial number. The available channels
on each transceiver are listed separately.
b
For each channel, choose which transducer to connect to.
The list of transducers available for installation is defined by those you installed
on the
Transducer
page.
Note
This is a critical task. Make sure that the correct transducer is selected.
c
At the bottom of the page, select
Apply
to save your settings.
d
Observe that the status for the relevant frequency channels change to
Installed
.
Simrad CP200-5C Installation Manual
Summary of Contents for Simrad CP200-5C
