Kongsberg Simrad CP200-5C, Installation Manual

Page: 71 / 110

484164/A
69
Unpacking the transducer from its transport
crate
The CP200-5C transducer is shipped in a wooden box. Prior to installation, the transducer
must be unpacked from its box, and placed under the mounting location.
Prerequisites
You must be equipped with a standard set of tools. This tool set must comprise the normal
tools for mechanical tasks. Each tool must be provided in various sizes. We recommend
that all tools are demagnetized to protect your equipment. The following specific tools and
items are required for this task:
• Adjustable spanner (Wrench)
• Crowbar
• Hammer
• Protective mat (for the transducer face)
• Ropes and tackles
• Transportation cart
Context
A transducer must always be handled as a delicate instrument. Incorrect actions may damage
the transducer beyond repair. Observe these transducer handling rules:
•
Do not
activate the transducer when it is out of the water.
• Do not handle the transducer roughly. Avoid impacts.
• Do not expose the transducer to direct sunlight or excessive heat.
•
Do not
use high-pressure water, sandblasting, metal tools or strong solvents to clean
the transducer.
• Do not damage the outer protective skin of the transducer.
•
Do not
damage the outer protective skin of the transducer face.
• Do not step on the transducer cable.
• Do not damage the transducer cable.Avoid exposure to sharp objects.
Procedure
1 Prepare a cart or any other type of suitable transport vehicle.
2 Place a protective mat on the cart to safeguard the transducer face.
Installing the transducer