Kongsberg Simrad CP200-5C, Installation Manual

Page: 91 / 110

484164/A
89
Context
The transducer is added using the
Transducer Installation
page. The
Transducer Installation
page is located in the
Installation
dialog box.
You can only choose a transducer from the
Model
list. The
Model
list is generated from
a system file provided with the CP200-5C software. It contains all the transducers that
are compatible with the transceiver(s) you have. The list also includes the technical
specifications for each transducer. You can not see this information, but it is used to set
up the operating parameters This allows each transceiver to optimise its performance for
the individual transducer models.
If you cannot find your transducer in the list, contact you dealer, agent or Kongsberg
Maritime to upgrade the relevant software component.
Note
Just making changes and selecting
OK
at the bottom of the page will not install anything.
Select what to install, define the relevant parameters, and then select
Add
.
Procedure
1 Open the
Setup
menu.
2 On the
Setup
menu, select
Installation
.
Observe that the
Installation
dialog box opens. This dialog box contains a number of
pages selected from the menu on the left side.
3 On the left side of the
Installation
dialog box, select
Transducer Installation
.
4 Select the transducer you wish to install from the
Model
list.
5 Insert the serial number.
6 Type the name you wish to use into the
Custom Name
box.
Type any name that you wish to use to identify the transducer. The name you select
will only be used to identify the transducer in other dialog boxes. It is not used in
the echo data that you export.
7 Select mounting method.
8 Specify the orientation of the transducer beam.
• If the transducer has been installed with the transducer face in a horizontal position,
the beam is pointing straight down. You must then select Vertical orientation.
• Set
Orientation
to Horizontal if the transducer has been mounted with its face
upright for horizontal beams.
Setting to work