484164/A
25
Tools, equipment and consumables required
for installation
To install the CP200-5C transducer, all necessary tools and equipment for mechanical work,
welding and electrical wiring must be available.
It is not practical to provide a detailed list of all necessary tools and equipment. You must
be equipped with a standard set of tools. This tool set must comprise the normal tools for
electronic and electromechanical tasks. This includes different screwdriver types, pliers,
spanners, a cable stripper, a soldering iron, etc. Each tool must be provided in various sizes.
We recommend that all tools are demagnetized to protect your equipment. However, you
must make sure that the following specialized tools are available.
• All necessary tools and consumables required for mechanical work
• All necessary tools and consumables required for welding
• All necessary tools and consumables required for electrical installations
If you need specific consumables, or if special tools and/or test instruments are required,
these are identified in the relevant procedure(s).
Related topics
Personnel qualifications
Installation of the CP200-5C transducer is a demanding task that requires careful
preparations, a number of specific procedures, wiring and required system settings.
Installation tasks must only be done by fully trained personnel.
As a minimum, the following certified personnel must be available:
• Naval architects
• Welders
• Electricians
• Project manager
Summary of Contents for Simrad CP200-5C
