RP-800T
860 MHz UHF FM VOICE TRANSMITTER
OPERATING MANUAL
INTRODUCTION
This Voice Transmitter has been specifically designed for use in combination with the Voice Pager (receiver) model RP-800R, for
the following purposes :
-
as a transmitter for Voice Paging Systems in Tourists Guided Tours
-
as a transmitter for Voice Paging Systems in Conferences, Congresses, Meetings, Voice Interpretation, etc.
-
as a transmitter for Voice Paging Systems in stores, hotels, restaurants, resorts, factories, warehouses, offices, shops,
motorcycle driving schools, etc. and wherever a message or a voice communication from a main transmitter must be received
by either one or more groups of persons or by a single person.
The transmitter operates on the 860 MHz UHF FM band, which is usually free from interferences. Transmitter is fully programmable
by the system manager in the PROGRAM mode. Please read the following operating instructions before using the radio.
KEYS AND CONTROLS
1.
High efficency Antenna
2.
UP Key
3.
Hole for Necklace
4.
DOWN Key
5.
Window for Operator Card
6.
Desk Charger Contacts
7.
MO (MODE) Key
8.
EMG Key
9.
Power ON-OFF Key
10. TX Key
11. Belt Clip
12. Battery door
13. Backlighted LCD
14. Microphone Jack
LCD DISPLAY
A.
Transmitting Icon
B.
Channel Number
C.
Battery Level Indicator
D.
EMG Channel Icon
E.
VOX (Handsfree use) Icon
BATTERY INSTALLATION
1.
Remove the Belt Clip (11). To
remove the belt clip, pull the block
tab toward exterior and slide the
clip toward the up side of the unit.
2.
Slide down and remove the
battery door (12) by unlocking the
block tab.
3.
Install 3 x AA size batteries.
Please respect correct polarity.
4.
Re-install the battery door (12).
5.
Re-install the Belt Clip (11).
