484164/A
93
Tip
If no transceivers are listed:
1
Select
Browse
in the
Transceiver Browsing
box, and open the
Local IP Address
box.
2
Select the correct address for the Ethernet adapter you are using. Select
Apply
.
This will make the echo sounder search the network for available transceivers.
3
Turn each transceiver off and on.
The echo sounder system automatically assigns an IP address to a transceiver that is
turned off and on.
Select
Browse
.
4
Make sure that the Ethernet communication between the units is operational.
5
If you are using an Ethernet switch, make sure that it works.
6
If you have changed the network settings, turn each transceiver off and on.
The echo sounder system automatically assigns an IP address to a transceiver that is
turned off and on.
4
At the bottom of the page, select
Apply
to save your settings.
5
Repeat until all the channels have been installed.
6
Continue your work in the
Installation
dialog box, or select
OK
to close it.
Result
When all channels have been installed, you can start normal operation.
Related topics
Summary of Contents for Simrad CP200-5C
