Komatsu Utility 97SF11205, Operation & Maintenance Manual

Page: 60 / 296

58
SAFETY LOCKS
3.1.2 BACKHOE LOCKS
The backhoe is held completely raised by a single coupling that
does not permit the lowering of the boom.
The other safety device regards the swing, which is locked, ei-
ther in the central and in the folded position, by means of a pin.
To lock the boom, proceed as follows:
1 - Fold the bucket and arm completely.
2 - Raise the safety lock (1) by pressing the control switch (led
on) positioned on the side dashboard (see “3.3.2 pos. 20”).
3 - Raise the boom completely and engage the safety lock (1)
by pressing the switch again (led off).
4 - Rotate the boom and insert the antirotation pin (2).
5 - Install the safety chains (5) for the stabilizers.
6 - Stop the engine and shift the levers (3) to settle the safety
locks.
7 - Engage the control lever lock (4).
IMPORTANT
☞
•
If the machine is equipped with backhoe servo controls,
always engage the control locking safety device by press-
ing the relevant switch, see “3.3.5.2 MACHINE CONTROLS
(Version with servo controls)”, pos. 26.
RWAA0780
1
RWAB0090
1
RWAB0080
2
RWA34830
3
4
RWA03650
5