Komatsu Utility 97SF11205, Operation & Maintenance Manual

Page: 154 / 296

152
PARKING THE MACHINE
3.7 PARKING THE MACHINE
3.7.1 PARKING ON LEVEL GROUND
DANGER
•
Park the machine on firm and flat ground, in a sufficiently
wide space, so that the checks, daily lubrication and refu-
elling can be carried out without problems.
•
Lower the front bucket to the ground and set the backhoe
to the transport position or with the bucket resting on the
ground.
•
Keep to all the safety rules, in order to avoid any move-
ment of the machine when the operator is absent.
•
When leaving the machine, remove the ignition key, use
the ladders and handles, lock the cab.
1 - Park the machine on firm and flat ground, in a sufficiently
wide space.
2 - Move the gearshift - reversing gear lever to position (N) and
apply the parking brake.
3 - Rest the front bucket and the backhoe bucket onto the
ground; if this is not possible because the space is insuffi-
cient, the backhoe must be folded in the transport position
and secured with the appropriate lock.
4 - Engage the safety device of the front bucket control lever and
the safety lever of the backhoe levers.
IMPORTANT
☞
•
If the machine is equipped with backhoe servo controls,
always engage the control locking safety device by press-
ing the relevant switch, see “3.3.5.2 MACHINE CONTROLS
(Version with servo controls)” pos. 26.
5 - Stop the engine following the procedure indicated in para-
graph “3.8 STOPPING THE ENGINE”.
6 - Leave the driving position using the ladders and handles pro-
vided for this purpose.
7 - Refuel taking the necessary precautions.
8 - Remove the ignition key and lock the cab.
RWA35030
RWA31250
RWA34810
RWA28230