1.3
Section 1
Safety and General Information
1
Engine Identification Numbers
When ordering parts, or in any communication
involving an engine, always give the Model,
Specification, and Serial Numbers of the engine.
The engine identification numbers appear on a decal
(or decals) affixed to the engine shrouding. See Figure
1-1. An explanation of these numbers is shown in
Figure 1-2.
Model Designation
Model CS6ST for example: C designates Command
engine, S designates slanted cylinder configuration,
and 6 designates horsepower. A suffix letter
designates a specific version as follows:
Figure 1-1. Engine Identification Decal Location.
Identification Decal
A. Model No.
Command Engine
Slanted Cylinder
Horsepower
4 = 4 HP
6 = 6 HP
8.5 = 8.5 HP
10 = 10 HP
12 = 12 HP
Suffix
Designates
T
Retractable Start
S
Electric Start
G
Tapered Crankshaft
P
Threaded Crankshaft
R
Gear Reduction (2:1 or 6:1)
Figure 1-2. Explanation of Engine Identification Numbers.
#
NOTE: CS8.5 engines have been produced in two different specification series, 92xxxx and 95xxxx. The design
features of 92xxxx spec. no. engines are identical to CS10 and CS12 engines, and share the same
service procedures. The 95xxxx spec. no. engines incorporate certain design differences from the
92xxxx spec. no. series. All service and repair information unique to the 95xxxx spec. no. series will be
listed and covered separately.
C S 6 ST
Variation of
Basic Engine
B. Spec. No.
Engine Model Code
Code
Model
90
CS4
91
CS6
92
CS8.5
#
300 cc
93
CS10
94
CS12
95
CS8.5
#
250 cc
911 509
C. Serial No.
Year Manufactured Code
Code
Year
28
1998
29
1999
30
2000
Factory Code
28 23701265
A
B
C
IMPORTANT ENGINE INFORMATION
THIS ENGINE MEETS U.S. EPA
PHASE 1 AND 2000-2001
CALIFORNIA EMISSION CONTROL
REGULATIONS FOR SORE*
FAMILY
MODEL NO.
CS6ST
SPEC. NO.
911509
DISPL (CC)
SERIAL NO.
2823701265
REFER TO OWNER'S MANUAL FOR
SAFETY, MAINTENANCE SPECS,
AND ADJUSTMENTS. FOR SALES
AND SERVICE IN US/CANADA CALL:
1-800-544-2444
KOHLER CO. KOHLER, WI USA
(Ref.***-*******)
*Small Off-Road Engines.
Summary of Contents for COMMAND PRO CS10
