1.15
Section 1
Safety and General Information
1
Middle Compression Ring End Gap
CS4,CS6 ......................................................................................... 0.2/0.4 mm (0.008/0.016 in.)
CS8.5 (spec. 95xxxx) ...................................................................... 0.25/0.4 mm (0.010/0.016 in.)
CS8.5 (spec. 92xxxx) ...................................................................... 0.2/0.4 mm (0.008/0.016 in.)
CS10 ............................................................................................... 0.2/0.4 mm (0.008/0.016 in.)
CS12 ............................................................................................... 0.25/0.4 mm (0.010/0.016 in.)
Oil Control Ring End Gap
CS4,CS6 ......................................................................................... 0.2/0.4 mm (0.0079/0.0157 in.)
CS8.5-12 ......................................................................................... 0.2/0.7 mm (0.0079/0.028 in.)
Piston Thrust Face O.D.
2
New
CS4
2
......................................................................................... 55.975/55.990 mm (2.2037/2.2043 in.)
CS6
2
......................................................................................... 65.975/65.990 mm (2.597/2.598 in.)
CS8.5
3
(spec. 95xxxx) .............................................................. 74.954/74.998 mm (2.9509/2.9527 in.)
CS8.5
3
(spec. 92xxxx) .............................................................. 77.954/77.998 mm (3.0691/3.0708 in.)
CS10
3
....................................................................................... 77.954/77.998 mm (3.0691/3.0708 in.)
CS12
3
....................................................................................... 84.954/84.998 mm (3.3446/3.3464 in.)
Max. Wear Limit
CS4 .......................................................................................... 55.900 mm (2.20 in.)
CS6 .......................................................................................... 65.900 mm (2.60 in.)
CS8.5 (spec. 95xxxx) ............................................................... 74.898 mm (2.9487 in.)
CS8.5 (spec. 92xxxx) ............................................................... 77.898 mm (3.0669 in.)
CS10 ........................................................................................ 77.898 mm (3.0669 in.)
CS12 ........................................................................................ 84.898 mm (3.3424 in.)
Piston Thrust Face-to-Cylinder Bore Running Clearance
CS4,CS6
2
........................................................................................ 0.015/0.040 mm (0.0006/0.0016 in.)
CS8.5-12
3
........................................................................................ 0.002/0.066 mm (0.0001/0.0026 in.)
Reduction System
Case Mounting Bolt(s) Torque
CS4,CS6 ......................................................................................... 10 N·m (88 in. lb.)
CS8.5-12 ......................................................................................... 30 N·m (22 ft. lb.)
Crankshaft Gear Bolt Torque
CS4,CS6 ......................................................................................... 22 N·m (195 in. lb.)
CS8.5 (spec. 95xxxx) ...................................................................... 22 N·m (195 in. lb.)
CS8.5 (spec. 92xxxx) ...................................................................... 65 N·m (48 ft. lb.)
CS10-12 .......................................................................................... 65 N·m (48 ft. lb.)
Retractable Starter
Mounting Screws to Blower Housing Torque
CS4,CS6 ......................................................................................... 6.5 N·m (57 in. lb.)
CS8.5-12 ......................................................................................... 7 N·m (62 in. lb.)
Rocker Arm
Stud Into Cylinder Head Torque
CS4,CS6 ......................................................................................... 10 N·m (88 in. lb.)
Adjusting Jam Nut Torque ..................................................................... 7 N·m (62 in. lb.)
Summary of Contents for COMMAND PRO CS10
