Kohler COMMAND PRO CS10, Service Manual

Page: 104 / 154

9.20
Section 9
Disassembly
Remove Crankshaft
1. Carefully remove the crankshaft from the
crankcase.
Figure 9-86. Removing Governor Cross Shaft Hitch
Pin.
2. Remove the cross shaft out through the inside of
the crankcase.
Figure 9-85. Removing Crankshaft.
Remove Governor Cross Shaft
1. Remove the hitch pin and plain washer from the
governor cross shaft. See Figure 9-86.
Figure 9-87. Removing Governor Cross Shaft with
Inner Washer.
Remove Flywheel End Main Bearing and
Oil Seal
1. Remove the front oil seal from the crankcase.
See Figure 9-88.
Figure 9-88. Oil Seal Removed.