Kodak RP X-OMAT M6B, Service Manual, Page: 9 / 161

SECTION 3
Electrical Requirements
Basic Requirements
• 30 A, single-phase or three-phase, 2- or 3-wire service, earth ground required.
• Main Power Disconnect (wall-mounted, not furnished).
The main power disconnect switch must consist of a minimum 2-pole thermo-magnetic circuit breaker with solid
neutral and common trip, or a fused disconnect switch. This switch must be:
• located on a wall adjacent to the processor in the lighted area
• easily accessible from the processor site
• visible from the processor site.
IMPORTANT
In addition, all electrical services,
including earth ground, must comply with local and national
electrical code.
Standard Service Options
Table 3 Service Options
Voltage Frequency Service
Volts Hz
100/200 50/60 Single-phase, N, 3-wire and earth ground
120/208 60 Three-phase, N, 3-wire and earth ground
120/240 60 Single-phase, N, 3-wire and earth ground
127/220 50 Three-phase, N, 3-wire and earth ground
220/380 50 Three-phase, N, 3-wire and earth ground
240/415 50 Three-phase, N, 3-wire and earth ground
220 50/60 Single-phase, 2-wire and earth ground
240 50/60 Single-phase, 2-wire and earth ground
246628 1-5