Kodak RP X-OMAT M6B, Service Manual, Page: 10 / 161

SECTION 4
Water and Drain Requirements
Water Supply
NOTE
If the upper limit of the water supply temperature to the processor is exceeded, the developer
temperature may not be controlled correctly. A water chiller may be required.
a. Processor Supply
(1) Temperature: 4
°
to 32
°
C (40
°
to 90
°
F)
(2) Pressure: 172.35 to 448.11 kPa (25 to 65 psi) Install regulator if required.
(3) Volume: Controlled within the processor to 5.7 L/min. (1.5 gal/min.)
(4) Filtration: A 50-micron filter is required.
b. Water service must comply with local codes.
c. Tempered water service is suggested for processor cleaning and for mixing chemicals manually.
d. A molded adapter and washer are provided to adapt the processor garden hose fitting to the 1/2 in. N.P.T.
(male).
Drain
• Capacity: 15 L/min. (4 gal/min.)
• Connection: Open drain; avoid solid connection
NOTE
Do not use brass or copper for the drain lines. Drain service must comply with local codes.
1-6 246628