Kodak RP X-OMAT M6B, Service Manual, Page: 69 / 161

SECTION 1
Preventive Maintenance Procedures
Maintaining Your Processor
To provide for maximum operation of the processor, it is important that you check all parts of the processor for:
• Condition
• Cleanliness
• Adjustment
• Lubrication.
This section provides you with additional care and cleaning instructions that are not in the Operator Manual.
Make sure that you follow all the care and cleaning, and preventive maintenance procedures in the Operator
Manual.
See the publication ‘‘Care and Maintenance of Stainless Steel Processing Equipment’’ for further information.
How often you need to do the periodic maintenance procedures outlined in this manual, depends upon your
usage of the processor. As your usage of the processor increases, so should the frequency with which you do
the periodic maintenance procedures.
After you do the periodic maintenance procedures, process a number of films to check that:
• films are being transported through the processor correctly
• the quality of the film after processing is good.
Before you adjust, install, or remove any electrical component, disconnect the main power.
Electrical connections should only be done by qualified personnel.
When you use caustic solutions to clean, use rubber gloves and protective glasses. Always use
these solutions in a room that is correctly vented.
246628 3-3