Kodak RP X-OMAT M6B, Service Manual, Page: 55 / 161

Developer Filter
The DEVELOPER FILTER CANISTER is pressurized when the processor is energized.
Removing and Replacing the Developer Filter
[1] Deenergize the processor before proceeding.
[2] Turn the CAP counterclockwise until it stops.
[3] Rotate the TABS counterclockwise to disengage the LOCKS.
[4] Lift off the CAP.
[5] Remove and discard the old FILTER.
[6] Install the new FILTER.
[7] Wet the O-RING with water.
[8] Install the CAP by rotating the TABS to engage the LOCKS. Then tighten the CAP.
H048_0136BA
CAP
TAB
O-RING
FILTER
H048_0136BCA
Figure 47 Replacing the Developer Filter
246628 2-43