Kodak RP X-OMAT M6B, Service Manual, Page: 43 / 161

Adjusting the Tension of the Dryer Drive Belt
Moving parts.
[1] Check that:
• the processor is operating
• the DRYER TEMPERATURE CONTROL KNOB is in the full counterclockwise position
• the DRYER is cool.
[2] Adjust the tension of the DRYER DRIVE BELT by doing the following:
• Disconnect the main power.
• Loosen the LOCKING PIVOT SCREW.
• Loosen the ADJUSTING SCREW LOCK NUT.
• Rotate the ADJUSTING SCREW to tighten the DRYER DRIVE BELT until the ROLLERS just begin to
rotate.
• Rotate the ADJUSTING SCREW an additional 1 rotation.
• Tighten the LOCKING PIVOT SCREW.
• Tighten the ADJUSTING SCREW LOCK NUT.
H048_0093BA
H048_0093BCA
AIR
TUBE
ROLLER
ASSEMBLY
BELT
LOCKING
SCREW
ADJUSTING
SCREW LOCKNUT
ADJUSTING
SCREW KNOB
Figure 36 Adjusting the Tension of the Dryer Drive Belt
246628 2-31