Machine modification is allowed only when our
distributor approves it. Unauthorized
modification may cause injury or death.
Unauthorized modification voids the machine
warranty.
When any modification is intended, consult
with the authorized dealer/distributor.
・
Provide front guard (in option) on it at the
time of hydraulic power breaker work,
demolition work, and cutting work.
・
In working operation, do not fail tot close
the front window and door.
・
At the sites like mine and quarry stone,
etc. where there is a possibility of falling
stone, do not fail to wear head guard (in
option).
・
When working at the site where there is a
possibility of falling materials and flying
debris, person other than operator must
take enough distance from falling stone and
flying debris.
１
Q.
USE THE PROPER OPTIONAL ATTACHMENT
Use only optional attachments designed for and approved by manufacturer. Read, understand and
follow all instructions in the manual accompanying the optional attachment. Use of any optional
attachment not approved by manufacturer in writing, can cause serious injury to personnel, damage to
the machine and its components and shorten the life of the machine.
Contact an authorized our distributor for optional attachments available for the machine.
R.
CAUTION TO MODIFICATION
S.
PAY ATTENTION TO FALLING MATERIALS AND FLYING DEBRIS
At the site where there is a possibility of falling material and flying debris, provide protective guard on
it as required to protect operator from possible risks.
T.
PERFORM PRE-START INSPECTION
Walk around the machine before starting the machine, perform a PRESTART inspection of the machine
and make note of any abnormality. If any problems are found, repair or replace defective components
immediately. DO NOT OPERATE THE MACHINE until all problem areas are properly repaired. Always
keep the windshield, work lamps, and mirrors clean for good visibility.
［
1. SAFETY PRECAUTIONS
］
1-23
Copyright © 2015 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2YF00022ZE01] [0731CsCshWbYs]
