1.
Move the machine to a firm, level surface.
2.
Lower attachment to the ground.
3.
Refill fuel tank to full mark to reduce air
volume and condensation (moisture). This
will decrease the possibility of freezing in
the fuel tank rusting due to moisture and
other problems associated with start up and
operation.
4.
Close and secure all windows in place to
prevent water or moisture reaching the
electrical components of the machine.
5.
Thoroughly clean and inspect the machine.
Perform lubrication maintenance and repair
or replace any problem areas found before
restarting the machine.
6.
If performing the machine storage in cold
climates, it may be necessary to remove
the batteries from the machine and store
in a warm well ventilated area. Install the
batteries in the machine before next start
up. This will help prevent premature battery
deterioration.
7.
Remove key from key switch and lock all
doors and access panels.
１
1.9
END OF WORK SHIFT SAFETY
Perform all of the following procedures after each shift is complete to insure the machine it in optimal
operating condition for the next shift or job site.
END OF WORK SHIFT SAFETY
［
1. SAFETY PRECAUTIONS
］
1-43
Copyright © 2015 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2YF00022ZE01] [0731CsCshWbYs]
