Keep the machine clean and free of debris,
excess or spilled lubricants, fuel and fluids.
Use approved solvents, detergents and water
to clean the machine and its components on a
regular basis.
A life hammer is provided on the right side of
cab. In case of emergency, take the life
hammer, break the cab glass, and escape
from the cab.
In addition, the life hammer is equipped with a
cutter on the lever side to cut the seat belt, etc.
J.
CLEAN THE MACHINE
Be careful not to allow water to reach electrical components. Serious damage can occur to the
electrical system by allowing water to reach the electrical components. Never clean inside of cab, or
electrical components with pressurized water or steam.
K.
KEEP THE AREA AROUND THE OPERATOR SEAT CLEAN
・
When taking the operator's seat, do not fail to remove mud, grease and oil, etc. on the sole of
shoes. The sole with mud, grease and oil, etc. might slip on the pedal when operating resulting in
accident.
Do not leave parts and tools in the area around the cab.
・
Do not leave plastic bottle inside of the cab and put suction cup on the window glass.
They may do the same job as lenses introducing the possibility of fire.
・
Do not take dangerous substances like combustibles and explosive substances into the cab.
・
Do not use radio and cellular phone in the cab in traveling operation and working operation.
・
After using the ashtray, put out the fire of matches and cigarettes without fail and close the cover.
・
Do not leave cigarette lighter inside of the cab. There is a possibility of fire due to high
temperature.
L.
HOW TO HANDLE LIFE HAMMER
For the emergency escape way, see "2.3.11 EMERGENCY ESCAPE FROM CAB" in Chapter 2.
［
1. SAFETY PRECAUTIONS
］
1-20
Copyright © 2015 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2YF00022ZE01] [0731CsCshWbYs]
