Knick Stratos Pro A4..MSPH series, Instruction Manual

Page: 105 / 148

105
Diagnostics
Display Menu item
Display example:
Display of currently measured values
( sensor monitor)
Select MONITOR using , confirm with
enter
. Use
the keys to select the desired parameter from
the bottom line of the display: mV_PH mV_ORP
RTD R_GLASS R_REF I-INPUT (for digital sensors also:
OPERATION TIME SENSOR WEAR LIFETIME CIP SIP
AUTOCLAVE). The selected parameter is shown in the
main display.
Press
meas
to return to measurement.
Display mV_pH
(for validation, sensor can be immersed in a calibra-
tion solution, for example, or the device is checked by
using a simulator)
Display of remaining dynamic lifetime
(only for digital sensors, however not for MEMOSENS)
Display of sensor operating time
(for digital sensors only)
Display of sensor wear
(only for digital sensors of the InduCon type)
Version
Display of
device type, software/hardware version
,
and
serial number
for all device components.
Use the keys to switch between software and
hardware version. Press
enter
to proceed to next
device component.