Klever Q-Powe, User Manual

Page: 57 / 72

57
teChniCal data
Recommended tightening torque values of the bicycle components
Stem
Handlebar clamp screw M5 Allen wrench 4mm 5.5 Nm max.
Stem
Clamp screw adjusting angle M6 Allen wrench 5mm 9.5 Nm max.
Stem
Clamp screw steer tube M6 Allen wrench 5mm 9.5 Nm max.
Seat post
Clamp screw saddle M6 Allen wrench 5mm 9.5 Nm max.
Seat post Clam -
ping screw
Clamp screw for seat post M5 Allen wrench 4mm 5.5 Nm max.
Front wheel
Axle nut; Hexagon 9mm axle diameter 15mm open-end
wrench
20 Nm max.
Rear wheel
Axle nut; Hexagon 12mm axle diameter 19mm open-end
wrench
30-40 Nm
Rear wheel
Clamp screw locking washer M5 Allen wrench 3mm 5.5 Nm
Stand
Clamp screw M10 Allen wrench 8mm 46 Nm max.
Brake lever
Clamp screw M6 Allen wrench 5mm 9.5 Nm max.
Brake body
Mounting screw M6 Allen wrench 5mm 9.5 Nm max.
Brake
Mounting screw M5 Torx25 5.5 Nm max.
Shift lever
Clamp screw M6 Allen wrench 5mm 9.5 Nm max.
Carrier
Clamp screw M5 Allen wrench 4mm 5.5 Nm max.
Carrier
Clamp nuts; Hexagon; self-
locking
M5 8mm open-end
wrench
5.5 Nm max.
Pedals
15mm small open-
end wrench
35 Nm max.
Button bracket
Bearing cups BSA Threat Special bearing tool 50-70 Nm
Crankset
Mounting screw M10 Allen wrench 8mm 45 Nm max.
Derailleur
Mounting screw M10 Allen wrench 5mm 8-10 Nm
Derailleur
Clamp screw cable M5 Allen wrench 5mm 6-7 Nm
Derailleur
Clamp screw jockey wheels M4 Allen wrench 3mm 2.5-5 Nm
Front lamp
Clamp screw M6 Allen wrench 5mm 9.5 Nm
General maximal screw tightening torque (for lubricated DIN screws)::
Screw
M4 M5 M6 M8 M10
Tightening torque in Nm
2.9 5.5 9.5 23 46
The torque indications always refer to the upper limit of the screws resilience.
You should always adjust the torque key to a little more than 50% of the value stated by the manu
-
facturer and tighten the screw. Check the firm fit of the connection afterwards.
If the clamping connection is not strong enough, increase the value gradually in steps of 0,5 Nm.
If necessary, adjust the maximal value (never exceed it) and loosen the screw by half a revolution
before finally tightening it.