Klever Q-Powe, User Manual

Page: 34 / 72

34
klever moBility ProPulsion system
6.4.3 Disassembly and assembly of the battery
Removing the battery
The battery is automatically saved with the battery lock and
thereby protected from theft. Using the provided key you can
lock and unlock the battery lock on the frame.
To disassemble the battery, first turn off the system using the 1
button on the Display. Turn the key in the battery lock clockwi -
se up to the stop and pull out at the same time on the handle
the battery pack upwards, in the direction of travel, completely
out of the bracket on the frame.(image 33a)
Now you can charge the battery separately or store it safely for
a longer ride break.
In case of disassembly we recommend, to protect the battery
connector against humidity with the rubber seal. (image 33
b+c)
Mounting the battery
Insert the battery carefully into the guide rail, while the groove
of the battery casing must be careful inserted into the guide
rail on the bicycle frame, and let it gently down glide until
you heard the lock engages and the electronic contacts are
connected. (image 34)
Without the key in the lock, the lock will automatically snap in
and the battery is now locked, the system is ready for operati
-
on and the battery protected from being stolen.
image 34
image 33a
image 33b
image 33c
Rubber seal
Rubber seal
Contact
Connector