Klever Q-Powe, User Manual

Page: 21 / 72

21
klever moBility ProPulsion system
6.3.2 Display Content
Battery Status (Image 19)
The battery icon shows the charging status of the battery. One
bar represents 20% of full capacity (half bar for 10%). If only
one bar is shown, only 20% of the maximum capacity of the
battery is available.
Now the battery should be recharged as soon as possible.
When the battery icon flashes, there is less than 10% battery
capacity remaining. Recharging of the battery is now urgently
needed.
Display Charging level
Five bars light up 100%
Four bars light up 80%
Three bars light up 60%
Two bars light up 40%
One bar light up 20%
battery icon flashes Less than 10%
Additionally, you can check the charging level with the LED on
the front side of the battery. (See also Section 6.4.1. Charging
the battery)
To save energy, it´s not possible to choose the highest support
level from a remaining capacity of 10% (one capacity bar of
the display is blinking; see also chapter 6.2 on page 15) . From
5% remaining charge on, it´s only possible to use the lowest
support level.
Support level (Image 20)
The bars in the upper part of the screen show of the chosen
level of support of the electric motor.
In the right column of the table we have listed recommended
settings, in which driving situation which level will be the best
to use the system optimally and minimize power consumpti
-
on. Of course it is possible to use the levels individually, e.g.
driving in the plane with the highest level of support (H).
image 19
image 20