5
QuiCk start
Charging the battery:
Warning! The battery must only be charged with
the appropriate, provided charger (Image 4)
The battery can be charged both on the bike (Image 7a) or
separately (image 7b) (to take out the battery, see chapter
6.4.3.).
Connect the power cord to the charger first, then the power
cord into a wall socket. When the LED on the charger lights up
steady red, the device is ready for use (Image 6).
Now connect the charging plug of the charger to the charging
port of the battery (Fig 5 + 6 + 7 / 7b).
The charging process starts automatically. Once the LED shows
a steady green light, the charger stops and the battery is
charged.
Now first pull the power plug from the wall socket and remove
the charging plug from the battery afterwards.
Charging
status
Charging indicator (LED)
Charger
Charging indicator
(LED) Battery
Remark
Flashing red
Error, check connections
Steady red
Charger is ready
0%
Flashing yellow
Flashing red
Capacity is very low, charging starts
<35%
Steady yellow
Flashing red
Normal charging
35 – 75%
Steady yellow
Flashing yellow
Normal charging
75 – 90%
Steady yellow
Flashing green
Normal charging
>90%
Flashing green
Flashing green
Final charging
100 %
Steady greenq
LED off
Battery is fully charged
Charging time of an empty battery takes about four hours (0-96%) (0-100%= 6 hours).
image 4
image 5
image 6
image 7b
image 7a
Power cable Charger Power Plug
Charging port
LED
Summary of Contents for Q-Powe
