Klever Q-Powe, User Manual

Page: 17 / 72

17
klever moBility ProPulsion system
6.3.1 Function of each button:
Start/ stop button (Image 11)
By pressing button 1 for 1 sec boot the system. The system
performs a system check of about 1-2 seconds, and the drive
system is ready to operate. The electric drive supports you
depending on the level of assistance during pedaling.
By pressing this button again the system turned off and all set
-
tings are stored. Now the Pedelec works like a normal bicycle.
Press the button again, the system starts at exactly the point at
which you have turned it off and all old settings and levels of
support are enabled again.
Attention! After 8 minutes of inactivity, the
system turns off automatically
image 11
Button: Location Function
Power Lower right edge On / Off
Minus (-) Lower left Switch down support level
Plus (+) Middle left Swith up support level
Menu Top left Switch between clock, trip, total
distance and remaining range
Turbo Lower left edge Starting and pushing aid (at rest);
strongest support (while pedaling)