Klever Q-Powe, User Manual

Page: 51 / 72

51
maintenanCe, Care and storage
9. Maintenance, Care and Storage
Maintenance and Care
Regular maintenance and care guarantee a longer lifespan of
your high-quality Pedelec.
You should carry out simple cleaning and care works yourself
regularly and let the dealer do the necessary inspections.
Never clean the Pedelec with a strong jet of water or a steam
cleaner. The high water pressure might squeeze water into
the bearings, motor and electronic contacts and will destroy
these parts due to thin the bearing grease, corrosion and short
circuits. Clean the bike with a damp cloth and mild detergent.
Please make sure that no electrical contact gets wet.
The contacts can be maintained and conserved from time to
time with a little care oil (e.g. 1Step Finish Line) preservation.
Contact spray is too aggressive and don´t preserve.
You should repair varnish damages at once. All parts liable to
corrosion should be maintained and preserved by appropriate
means.
The chain should be lubricated regularly like all other movable
mechanical parts such as the joints of the rear derailleur
Caution: During cleaning and lubrication, avoid
oil and fat on the brake pads and brake discs. The
braking effect might deteriorate and represent a
serious risk.
Always ensure that the tires are inflated within the
manufacturer‘s recommended operating pressure,
which can be found printed on the on the tire side -
wall. It should by no means exceeded or underrun.
The entire electrical system of your Pedelec as the controller,
the motor, the sensors, the wiring and the battery is mainte
-
nance-free. If you get unexpected problems with the system,
take note, that you have to contact or technical hotline (see
also Chapter 1 Introduction) or an authorized dealer.
Caution: Do not open the controller, the motor,
the display or the battery. It is dangerous and the
guarantee expires immediately.