1.
Verify that your E-Kit contains all of the following materials for proper
installation:
•
Wheel and motor assembly X1
•
Battery pack/controller bag and bracket assembly X1
•
Throttle X1
•
Full sized handle grip X1
•
Half sized handle grip X1
•
Throttle sleeve X1
•
Circular half-brackets X3
•
Circular T-shaped half-bracket X1
•
5mm hex-bolts X6
•
5mm Allen wrench X1
•
3mm Allen wrench X1
•
Zip-ties X2
•
Trikke emblem badge X1
•
Trikke Tribred front post sticker X1
•
2” Clear alignment stickers X2
•
1” Clear alignment sticker X1
•
Clear wire bundler stickers X3
2.
Remove the existing Trikke sticker from the front post. Also, remove
the water bottle cage from the front post if you have one installed.
