![background image](http://html.mh-extra.com/html/trikke/e-kit/e-kit_manual_1162649007.webp)
14. Reassemble the brakes.
•
Feed the brake cables through the spaces located in
the front center of each bracket. Do not set the brake
cables in the brake cable brackets on the front post
(arrows).
•
Cross the brake cables once behind the post and once
more in front of the post.
This will ensure the left
brake handle will apply the left brake and the same for
the right side.
•
Reverse the brake cable detachment procedure of step
3 above.
Note: if there is not enough brake cable
visible from the brake cable sleeve, just push the sleeve
down the cable until enough brake cable is showing.
This is why we do not set the brake cables into the
brake cable brackets until later.
•
Set the brake cable sleeves into the brake cable
brackets on the front post (arrows).
•
Squeeze the brake handle.
There should be space
between the brake handle and the handle grip at
maximum strength. The adjustment screws located on
maximum strength. The adjustment screws located on
the brake handle can be used to add or remove tension
from the brake line (lower arrow).