E-Kit User’s Guide
The Trikke Tribred will need to charge for a minimum of 8 hours before
its first use.
To charge the Trikke Tribred, first plug the charging unit
into a normal 110V socket. Note that there should be a green light on
the charging unit box. Connect the other cable of the charging unit to
the plug located on the backside of the bag assembly near the top. The
charging unit box light should turn from green to red. Once the charge
is complete, the light on the charging unit will turn from red to green.
To turn the Trikke Tribred on, press the green button on the throttle in
for 3-seconds, then release. The battery life indicators on the throttle
will illuminate – all the way green indicates a full charge.
There is a speed limiter switch next to the charger plug on the bag
assembly. When turned on, the switch will limit the speed of the Trikke
Tribred to 12mph.
To power the motor, simply turn the throttle. The throttle is sensitive to
the amount it is turned and will increase the power as it is turned
E-Kit Trouble Shooting Manual
Make sure that the ends of the wires in the wire connecters are securely
in place.
Sometimes the wires pop out which will result in a bad
connection and poor performance.
the amount it is turned and will increase the power as it is turned
further.
To turn off the Trikke Tribred, press the green button on the throttle for
3-seconds. The battery life indicator lights on the throttle will turn off –
signaling that the Trikke Tribred is off.