20. Install the front wheel motor assembly wire bundle – Part A
•
From the front wheel motor, make sure the wire
bundle is behind the front fork. Also make sure the
wire bundle will not rub the motor or wheel by
adjusting the existing zip-tie and wire bundle around
the front fork.
•
Allowing a little slack, use one of the zip-ties provided
to tie the wire bundle to the outside edge of the
cambering mechanism. Cut the excess zip-tie material.
•
Using the second zip-tie, attach the wire bundle to the
outside edge of the lower bag assembly bracket. Cut
the excess zip-tie material.
•
Open the outer flap and tuck the wire bundle inside.
•
Feed the connecters of the wire bundle through the
hole located in the top front center of the bag
assembly.