3.
Disassemble the brake cables from the brake handle.
•
Align the brake cable adjustment screws (arrow) so that
the slot in the screws line up with the slot in the brake
handle. This will allow the brake cable to come free out
of the front of the brake handle.
•
Squeeze the brake handle so that the small metal
cylinder attached to the end of the brake cable is visible.
•
Align the brake cable and the metal cylinder with the
brake handle slot so that the cable can come free of the
brake handle completely.
•
Repeat the above steps to disassemble the other brake
cable from the other brake handle.
4.
Free the brake cables from the cable bracket at the lower end of
the front post so that the brake cables can be pulled to the rear
of the Trikke. This will allow installation of the E-Kit without
interfering with the brake cables.