12. Install the bag and bracket assembly – Option A.
•
Fold the Trikke into its closed and locked position. Place
the battery pack/controller bag and bracket assembly
between the arms of the Trikke, but beneath the front
post.
•
Align the bag assembly with the half-circle brackets
holding the front post and the exposed bracket toward
the hinge (the bottom when unfolded) of the Trikke.
•
Align the brackets with the top of the brackets aligned
with the top of the clear alignment stickers.
•
Install two half-circle brackets with four 5mm Allen socket
bolts to the bag assembly. Make sure to keep the spacing
between each side of the bracket the same.
This will
ensure an even tension for each bolt and will prevent
stripping the brackets and bolts.
•
Unfold the Trikke to its upright and locked position.
Allow the bag assembly to “seat” by pushing down on the
assembly. Make sure to keep the bag assembly centered
and aligned with the top edges of the clear alignment
stickers.
•
Finishing tightening the Allen socket bolts.
B
•
Finishing tightening the Allen socket bolts.
13. Install the bag and bracket assembly – Option B.
•
This procedure is the same as Option A above except do
not fold the Trikke before installation. This will require
some strength and is possibly a two person installation.
