10
getting started
4. Start-up and safety check
During the assembly and in the final final inspection by the
dealer your bike was subjected to an intensive control. How
-
ever, transport and or prolonged non-use of the bicycle may
result in changes in the function.
So before you set off for the first time and before each further
ride, you should consider some important things and check
the bike shortly.
1. Before you use the bike for the first time, make yourself in
-
tensely familiar with the pedelec and the modes of operation
of the electric drive before you participate in public traffic.
2. Verify the correct setting of saddle and handlebars (see
section 7.1. Saddle and handlebar adjustment)
3. Check the correct function of the brake
4. Check the correct air pressure and tread depth of tires
5. Check the lighting system for proper operation
6. Check the bolted joints and the tightness of the wheels.
7. Check the minimum insertion seatpost
Warning! If the bike shows defects in one of these points,
under no circumstances should you ride the bike. A faulty
bicycle may result in serious accidents and endanger your
live. If in doubt, contact your dealer or contact us.
Warning! Like all mechanical parts, the bicycle is subject to
high loads and wear. Different materials and components re
-
act differently to wear and continuous load. If the expected
life of a component is exceeded, it can suddenly fail, causing
the injuries to the rider. Any form of cracks, scratches or
stains on heavily loaded parts suggest that the life of the
component has been reached and that it has to be replaced.
Summary of Contents for Q-Powe
