40
the BiCyCle
7.3 Suspension fork
Your Pedelec is equipped with a high-quality suspension fork
which increases your comfort and the safe handling of the
bike. The fork is set at the factory and ready to run.
You will find a preload adjustment on the left side of the fork
crown. Here you can adjust the suspension to your weight
and needs (Image 44). Turning the adjusment knob clockwise
stiffens the spring and adjusts it to heigher weights. Turning it
counter-clockwise, softens the spring and adjusts it to lower
weights.
To keep your fork working for a long time, it should be regular
-
ly maintained. Some basic maintenance tips you should heed.
Clean the smooth surface of the stand pipe of the fork after
every ride with a clean cloth and some water. Afterwards spray
the tubes with some lubricating spray or some hydraulic oil,
so it can smooth deflecting and the bearings remain always
lubricated.
Caution: You should never clean the fork eit
her with a steam cleaner or with harsh detergents.
Always follow the maintenance and care instruct
ions on the manufacturer‘s instructions supplied
with the bike.
7.4 Brakes
Your Pedelec is equipped with a high-quality Tektro hydraulic
disc Brake (Image 45). The disc brake is characterized by a very
good braking action even by moisture and other bad weather
conditions. The brake is very low maintenance and does not
wear the rim.
The brake consists of a brake lever with a master cylinder, a
hose made of plastic, the brake caliper and the disc mounted
on the hub. The brake works with a special, non-toxic mineral
oil. The oil pressure created in the brake lever by operating it is
transmitted via the hose to the brake cylinder, which transfers
it as contact pressure of the brake pads to the brakes disc.
image 44
image 45
Summary of Contents for Q-Powe
