Klever Q-Powe, User Manual

Page: 46 / 72

46
the BiCyCle
Disassembly of the front wheel
Open the quick release lever by hand. Loosen the adjust -
■
ment nut on the opposite side a few turns
Pull the front wheel out of the dropouts of the fork
■
Secure the disc brake with a transport lock, analogous to
■
the rear brake
The assembly is done in reverse order
■
During assembly please carefully place the disc between
■
the brake pads
Make sure to tighten the axle nuts to the recommended
■
torque of 20Nm
Note: Rotors can be very hot after driving. Let
them cool down before disassembly.
Caution: Check before you ride the tightness of the
wheels.
image 51