KitchenAid Pro Line KHWV01RSS, Technical Education

Page: 86 / 104

5-6
INTERLOCK SWITCH
Actuator
Refer to page 4-21 for the procedure for ac-
cessing an interlock switch.
1. Unplug washer or disconnect power.
2. Disconnect the wires from the interlock
switch terminals.
3. Set the ohmmeter to the R X 1 scale.
4. Touch the ohmmeter test leads to the
two interlock switch terminals. The meter
should indicate an open circuit with the
actuator in, and a closed circuit (0
Ω
) with
the actuator out.
DRIVE MOTOR
Refer to page 4-23 for the procedure for ac-
cessing the drive motor.
1. Unplug washer or disconnect power.
2. Disconnect the wire connector from the
drive motor.
3. Set the ohmmeter to the R X 1 scale.
4. Touch the ohmmeter test leads to the fol-
lowing drive motor pins. The meter should
indicate between 3 and 8
Ω
.
Pins 1 & 2
Pins 1 & 3
Pins 2 & 3
NOTE: Pins 4 and 5 are for the tachometer.
(Connector Viewed From Wire End)
1
2
3
4
5
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
WARNING